De-soldering Braid / Wick 1.5m 3.5mm

Precision Solder Management In modern electronics repair, removing solder is just as important as applying it. When a solder bridge occurs (where solder accidentally connects two adjacent pins), or when a component like a capacitor needs replacing, the de-soldering braid acts as a “sponge” for molten metal. The 3.5mm width provides a larger surface area, making it the go-to choice for clearing large through-holes or wide SMD pads that smaller wicks would struggle to empty.   Key Technical Pillars & Features: High-Purity Copper Weave: The fine, geometric braid pattern maximizes surface tension, ensuring that once the solder reaches its melting point, it is drawn deep into the copper strands and held there. Pre-Fluxed Efficiency: The braid is impregnated with a high-performance flux (often a “no-clean” rosin type). This prevents the copper from oxidizing under heat and allows the molten solder to “wet” the braid immediately upon contact. Thermal Protection: Because the copper is oxygen-free, it transfers heat with extreme efficiency. This allows for a “fast-in, fast-out” desoldering technique, protecting the adhesive bond of the PCB pads which can easily “lift” if overheated for too long. Versatile Application: While 3.5mm is excellent for larger joints, the braid is soft and flexible, allowing it to be folded or angled to reach specific areas without affecting neighboring components.   Technical Specifications Feature Specification Material Pure Oxygen-Free Copper Width 3.5 mm Length 1.5 Metres Flux Type Pre-fluxed (Rosin-based) Compatibility Lead-based and Lead-free solders Usage PCB Rework, Component Replacement, Bridge Removal